The Burnmaster Eagle set was reviewed and compared by WOOD SHOP MIKE. Link to review: http://alturl.com/uuj2x
BURNMASTERTM WOOD BURNER By Mastercarver® High-performance tools!TM Imagine a top quality wood burning system that accepts two of any handpiece regardless of manufacturer, has up to 130 watts of power! It's not a dream, it's the Burnmaster! The advanced design of the amazing Burnmaster is so superior it's revolutionary! Unlike others, it accepts all major handpiece systems! So instead of being forced to use just one handpiece brand or buying adapters, you can choose & use virtually any handpiece. The Burnmaster accepts wood burning handpieces by Leisure Time Prod. (Detail Master), Colwood (Detailer), SMC / PJL, (Optima), Nibs, Navesink, Razertip & others with similar connections. Burnmaster controllers feature, pro quality components, precise variable power supply (130 watts max.), custom designed circuitry, reset / fuse protection, all-metal housing (3.5" x 4.75" x 8.5"), non-slip rubber feet, 6' power cord, manual & 3-year warranty! Weight: 4.5 lbs. Compare, quality features, & value, you'll prefer Burnmaster or your money back! Burnmaster Eagle features 130 watts maximum & includes 2 selectable handpiece power ports, 2 universal handpiece power cord/adapter sets & 2 handpiece holders. Handpieces not included, we recommend Burnmaster brand pens & tips. Uses standard 110-130 volt North American power. Note: We also offer international 220-230 Volt models.
499002 Burnmaster Eagle-2 ports
499002 Burnmaster Eagle-2 ports
How do you adjust for the lower heat range utilizing the hole at position 3?
The following is copied from the user guide provided with every unit:
“Micro Heat Adjustment. The Burnmaster® wood burner features a micro heat adjustment. This adjustment allows you to change the range of heat available to the heat adjuster dial from the original factory setting. For example, you may set it to allow heat adjustment across a cooler heat spectrum (the lowest setting will now be cooler than the original factory setting). Or conversely you may set it to allow adjustments only across a hotter heat spectrum (the lowest heat setting will now be hotter than the original factory setting). We suggest first trying the original factory settings and to only use the micro adjustment feature if you need lower or higher settings. Typically the original factory setting is ideal and you will not wish to change it.
The micro adjustment is accessed by inserting either a 2mm or 5/64” Allen (hex) key or wrench in the small round hole located on the face plate at setting position three (unmarked) between settings “2” and “4”. Turn the wrench clockwise to increase the heat range, turn the wrench in the opposite direction to reduce the heat range. Note: It is advisable to make a note of the approximate original position prior to adjusting.”